تكفون جيبولي طلبي والله محتاجه
 

http://www.w6w.net/album/35/w6w20050...258bb30d67.gif


السلام عليكم ورحمة الله وبركاته




مساء/صباح الخير


كيف الحال يا احلى اعضاء


طالبكم


محتاج بحث با الانقليزي

وانا انسان اعرف اتكلم واكتب جميع الغات الا النقليزي<<<<والله من الفقش


وابيكم تساعدوني


ما ابي احد يحطلي رابط ويقولي هذا بحث<<<<<طرار ويبي ثوب كبك


ابي الي يقدر وفاضي ووده يساعدني

يدورلي بحث عن مكانيكا انتاج<<<((مكاين))>>>

يا فرايز او مخارط او مكائن سي ان سي

اهم شي تختارون مكينه وتشرحون عليها با الانقلش

ابيها صفحتين بس

والله لا يهينكم سوها لي على الوورد وافعوها وعطوني الرابط

تكفوووووووووووووووووووووووووووون


الله يوفقكم دنيا واخر


عليه 25 درجه

يا ناجح يا حامل الماده

وانا معتمد علىالله ثم عليكم

محبكم

قلبي يحبه

http://www.w6w.net/album/35/w6w20050...258bb30d67.gif

ياعمري عليك والله لو اعرف ساعتك ياقلبي

جبت لك عن مكينه cnc

انشالله توفي بلغرض الي تبيه

:TORCHMATE II
CNC SHAPE CUTTING MACHINES


============================
Completed 5' x 8'" Torchmate II kit. Steel was fabricated from 3" square x 3/16" wall tubing. The rugged construction of the unit is quite evident in the photo. Rail system would easily support a 4,000 lb. pickup truck.


http://www.torchmate.com/overview/Earlbeck2.jpg
=====================================

The Torchmate II Super-Duty CNC gantry kit was over a year in development. Improved over the standard Torchmate in a variety of ways, it is comparable in construction and performance to industrial CNC plasma cutting machines costing $50,000 or more.

Torchmate II kit includes our 3 axis Windows-based electronics and driver software. Motors are 135 oz. in., and use a 3.4:1 reduction via timing pulleys and belts. This results in 459 oz. in. of usable power. The unit is powered on both sides via a 3/4" diameter drive shaft. We supply the components to do this other than the 3/4" cold roll round bar, which you purchase locally.

The heavy extruded aluminum gantry unit comes 90% finished. You make the simple drive shaft, paint the steel brackets, and bolt it together. You fabricate the rail system from locally purchased steel to save shipping dollars.

Kit completion time is approximately 16 hours -- probably no longer than it would take to bolt together a light duty machine that comes in a box.




The Torchmate II Windows based CNC gantry kit is pictured in the thumbnail image to the left. Click on the photo to see a large photo. The gantry itself is approximately 95% finished with only a couple of minor fabrication steps remaining. You build the rail system from locally purchased steel. It is a simple project that can be completed over the course of a weekend. We provide full instructions.
The Y axis uses a super-precision linear motion cassette with eight 1" diameter needle bearing rollers riding on hardened and ground rails. Load capacity is an amazing 4,518 pounds. The carriage is fitted with replaceable felt wipers at both ends. Hardened cap screws secure the rail assembly every 3" to the machine's heavy extruded aluminum frame. It is possible for a man of normal weight to stand on the roller cassette and have the machine carry him on both axes.
The machine rides on a three point support system comprised of 1" hardened and sealed needle bearing cam followers with a dynamic load rating of 2,225 lbs. each. It is guided laterally by identical cam followers. The rails are 1/2" x 4" cold roll flat bar. Cold roll bar is quite precise--usually under a thousandth of an inch in tolerance. By using mild steel rails, the cam follower surfaces will never wear. Should the rails wear slightly over the years, they can be replaced quickly and economically.
SolidWorks illustration of the gantry carriage. Effective in September, Torchmate purchasers will get an instruction CD which includes this SolidWorks 3-D model of the gantry portion of the machine. They can rotate the gantry and see it from every angle, and zoom in on any part of it to see the smallest detail.

http://www.torchmate.com/overview/tm...rts3_small.jpg

http://www.torchmate.com/overview/slide4_small.jpg

http://www.torchmate.com/overview/xa...lers_small.jpg

http://www.torchmate.com/overview/slatsupport_small.jpg

====================================

اذا ماتكفي صفحتين

عطني خبر

بتوفيق اخوي

تحيااتي لكـ

Dr-cool

http://www.w6w.net/album/35/w6w20050...258bb30d67.gif

اشكرك اخوي خالد على ردك

لكن لو اعرف اطلعها ما طلبتها منكم

ومشكووور


محبكم

قلبي يحبه

http://www.w6w.net/album/35/w6w20050...258bb30d67.gif

http://www.w6w.net/album/35/w6w20050...258bb30d67.gif

من ذوقك يا الغلا

ادري انكم ما تقصرون


ومشكوره على المرور اختي

محبكم

قلبي يحبه


http://www.w6w.net/album/35/w6w20050...258bb30d67.gif

http://www.w6w.net/album/35/w6w20050...258bb30d67.gif

من ذوقك يا الغلا

واشكرك على اهتمامك

مشكورين

محبكم

قلبي يحبه

http://www.w6w.net/album/35/w6w20050...258bb30d67.gif

http://www.w6w.net/album/35/w6w20050...258bb30d67.gif


يسلمووووووو لسعه على مرورك واهتمامك


ايه والله اخوي دكتور كول ما قصر معاي


واشكرك مره ثاانيه


محبكم

قلبي يحبه
http://www.w6w.net/album/35/w6w20050...258bb30d67.gif

http://www.w6w.net/album/35/w6w20050...258bb30d67.gif

مشكووووووور دكتور كول على اهتمامك


والله انك فكيتلي ازمه

اشكرك من كل قلبي

وانشا الله اخدمك وردلك جميلك


مشكورين يا الغلا على اهتمامكم

محبكم

قلبي يحبه

http://www.w6w.net/album/35/w6w20050...258bb30d67.gif